MTM 160 High pressure suspended roller mill parts

MTM 160 High pressure suspended roller mill parts,MTM 160 grinding mill also call YGM 160 grinding mill, It can grinder many ore to 10-800mesh. In the main machine of the high-pressure suspension roller mill, the grinding roller assembly is suspended on the grinding roller hanger through the cross arm shaft. The grinding roller hanger is fixedly connected with the main shaft and the blade holder. The pressure spring is pressed on the outer end face of the cantilever of the grinding roller bearing chamber, and the cross arm shaft is used as the fulcrum to force the grinding roller to press tightly on the inner surface of the grinding ring. When the motor drives the main shaft to rotate through the transmission device, the blade installed on the blade holder rotates synchronously with the grinding roller, The grinding roller rotates around its own axis while rolling in the inner circle of the grinding ring. The motor drives the analyzer to rotate through the transmission device. The higher the rotating speed of the impeller, the finer the powder sorted out. In order for the mill to work under negative pressure, the increased air flow is discharged into the bag filter through the residual air pipe between the fan and the main machine, and then discharged into the atmosphere after being purified.