jaw crusher for sale in IndonesiaTechnical Features
1. High crushing efficiency, with fine crushing and coarse grinding functions;
2. Simple structure, convenient installation and maintenance, and low operating cost;
3. The ability to pass non-crushing materials is strong, and it is less affected by the moisture content of the material, and the moisture content can reach 8%;
4. The product has excellent grain shape, is cubic, and has a very low needle flake content, which is suitable for aggregate shaping, artificial sand making and high-grade highway aggregate production;
5. The product has a large bulk density and very little iron pollution.
Entry Atlas
jaw crusher working
The working part of the jaw crusher is two jaw plates, one is the fixed jaw plate (fixed jaw), which is fixed on the front wall of the body vertically (or the upper end is slightly inclined outward), the other is the movable jaw plate (moving jaw), the position It is inclined to form a crushing cavity (working cavity) with a large upper and a lower small with the fixed jaw. The movable jaw makes periodic reciprocating motion against the fixed jaw, sometimes separating and sometimes approaching. When separating, the material enters the crushing cavity, and the finished product is discharged from the lower part; when approaching, the material installed between the two jaw plates is crushed by extrusion, bending and splitting.
Indonesia jaw crusher working principle
When the jaw crusher is working, the movable jaw plate periodically reciprocates to the fixed jaw plate, sometimes approaching and sometimes leaving. When approaching, the material is crushed by extrusion, splitting and impact between the two jaw plates; when leaving, the crushed material is discharged from the discharge port by gravity.
In the process of breaking huge rocks into smaller ones, the first crusher is usually the "main" crusher. The longest and most robust crusher is the jaw crusher. When feeding the jaw crusher, the material is poured into the crushing chamber containing jaw teeth from the top inlet, and the jaw teeth push the material against the chamber wall with great force, breaking it into smaller stones. Supporting the movement of the jaw teeth is an eccentric shaft that runs through the fuselage frame. Eccentric motion is usually produced by flywheels fixed at both ends of the shaft. Spherical roller bearings are often used in flywheels and eccentrically supported bearings, and the bearings must withstand huge shock loads, abrasive sewage and high temperatures.
CONTACT：+86-189-1619-6140 
24 hours telephone +86-137-6117-8946 