4528 High pressure pulverizer mill spare part

High pressure suspended roller mill

Processing materials: limestone, calcite, dolomite, barite, talc, calcium carbonate, gypsum, bentonite, etc

Feed particle size: 0-30mm, finished product output: 1-9.5t/h

1. The design is unique and can effectively improve the output. In the grinding chamber of the main engine, a 1500kg-2000kg pressurizing device is designed on the upper part of the plum blossom frame. Under the same power, the output is increased by 10-30%, the grinding pressure of the grinding device on the material is increased by 800-1500kgf, and the fineness of the finished product is good, up to 1000 mesh.

2. The material has strong applicability and can be used for various materials with Mohs hardness below 9.3.

3. Protect the environment, and the dust removal effect fully meets the standard.

4. The grinding roller device adopts the processing technology, and the overlapping multi seal has a good sealing effect.

5. The long replacement cycle of grinding roller and ring eliminates the disadvantage of short replacement cycle of vulnerable parts of centrifugal crusher.

6. The grinding device adopts overlapping multi seal, which has good sealing performance.

It is widely used in the processing of minerals such as calcite, dolomite and non combustible minerals with a humidity of less than 3.9% in mining, water conservancy and chemical industries. It is mainly used in the processing of calcite, dolomite, dolomite and other industries with a humidity of less than 3.9% Ideal choice for coal gangue, coal and other materials. The fineness of finished materials can be adjusted between 0.613mm and 0.033mm. It is a good grinding equipment for mineral powder and stone. The whole set of YGM series high-pressure suspension roller pulverizer is composed of host, reducer, analyzer, pipeline device, blower, dust collector, jaw crusher, dustpan elevator, electromagnetic vibration feeder, electric control system, etc.