YGM high pressure suspended roller mill

TIME：2022-09-27

Feed particle size: 10-30 mm

Production capacity: 1-30 TPH

Scope of application: calcium carbonate pulverization processing, gypsum powder processing, power plant desulfurization, non-metallic ore pulverizing, pulverized coal preparation, etc.

Processing materials: limestone, calcite, calcium carbonate, dolomite, barite, talc, gypsum, diabase, quartz stone, bentonite, etc.

YGM High pressure suspension roller mill is widely used in metallurgy, building materials, chemical industry, mining, expressway, water conservancy and hydropower and other industries. It is suitable for processing various non flammable and explosive materials with Mohs hardness below 9.3 and humidity below 6%. The fineness of finished products is 0.613mm-0.033mm. Special devices can also be added to grind out 30 ~ 80 mesh coarse powder.

Application scope: calcium carbonate crushing and processing, gypsum powder processing, power plant desulfurization, non-metallic ore pulverization, pulverized coal preparation, etc

Materials: limestone, calcite, calcium carbonate, dolomite, barite, talc, gypsum, diabase, quartzite, bentonite, etc

YGM high pressure suspended roller mill technical parameter

Model	Roller	rollersize (R×H)mm	ring (mm)	Max input(mm)	Finished (mm)	capacity (t/h)	Power(KW)			weight (t)	size (m)
Model	Roller	rollersize (R×H)mm	ring (mm)	Max input(mm)	Finished (mm)	capacity (t/h)	Main	fan	classifier	weight (t)	size (m)
YGM75	3	260×150	780×150	15	0.8-0.038	1-3	18.5	15	2.2	4.8	4.3×3.5×5.1
YGM85	3	270×140	830×140	20	0.8-0.038	1.2-4	22	22	4	8.5	5.3×4.1×5.2
YGM95	4	310×170	950×170	25	0.8-0.038	2.1-5.6	37	30	5.5	16	7.1×5.9×7.9
YGM130	5	410×210	1280×210	30	0.8-0.038	2.5-9.5	75	75	7.5	25.7	7.9×8.0×9.7

Note：Any change of technical data shall not be advised additionally.

YGM high pressure suspended roller mill working principle

After the large block material is crushed to the required particle size by the jaw crusher, the material is sent to the storage hopper by the elevator, and then the material is uniformly and continuously sent to the main grinding chamber by the electromagnetic vibrating feeder for grinding. The pulverized materials are sent to the classifier by the air flow of the fan for classification. Under the action of the impeller of the classifier, the materials that do not meet the requirements of fineness fall into the grinding chamber for re-grinding, and the materials that meet the requirements of fineness pass through with the airflow. The pipeline enters the cyclone powder collector for separation and collection, and the finished powder is discharged through the discharge device. The separated airflow enters the fan through the return duct at the upper end of the cyclone collector. The system is a closed loop system and operates under positive and negative pressure.

previous：coarse grinding mill NEXT：MTW European Grinding Mill