magnetic separator

TIME：2022-09-27

Magnetic separator for particle size less than 3mm magnetite, pyrrhotite, ilmenite and other materials, wet magnetic separation, but also for coal, non-metallic minerals, building materials and other materials in addition to iron work.Available downstream, semi-reflux, reflux-type and other forms of magnetic separator, cylinder surface magnetic field strength can be produced according to the actual use of the special.

Magnetic Separator Performance and Features

1.The aeration quantity can be increased or reduced according to actual requirement
2.The mechanical mixing device does not inhale air ,so the impeller(rotor)rotates slowly, resulting in reduced rotor-stator wear, longer life and lower power consumption
3.Since the mixing force is not very strong, the flotation machine will cause no pelitization during operation ,and the mineral surface is stable.

Specifications of Magnetic Separator

Model	Shell dimension (mm)		Shell rotation speed (r/min)	Capacity (t/h)	Power (Kw)	Weight (kg)
Model	Diameter	Length	Shell rotation speed (r/min)	Capacity (t/h)	Power (Kw)	Weight (kg)
CTB612	600	1200	40	10-20	1.5	1445
CTB618	600	1800	35	18-35	2.2	1655
CTB712	750	1200	35	12-30	3	1682
CTB718	750	1800	35	20-45	3	1992
CTB918	900	1800	27	28-60	4	3162
CTB921	900	2100	27	45-60	4	3475
CTB924	900	2400	27	38-80	4	3887
CTB1018	1050	1800	22	36-72	4	3801
CTB1021	1050	2100	22	45-88	5.5	4095
CTB1024	1050	2400	20	52-100	5.5	4319
CTB1030	1050	3000	22	64-105	7.5	4976
CTB1218	1200	1800	19	55-95	7.5	5263
CTB1224	1200	2400	19	65-110	7.5	5927
CTB1230	1200	3000	19	85-120	7.5	6325
CTB1530	1500	3000	16	95-160	11	9665
CTB1540	1500	4000	16	120-190	11	9871

Specifications of permanent Magnetic Force Tumbler

Model	Shell dimension (D×L) (mm)	Belr width(mm)	Magnetic field intensity on shell surface	Final size (mm)	Capacity (t/h)
XCT465	400×650	500	Order range 1600-4500 gauss	< 70	5
XCT565	500×650	500		< 70	10
XCT665	600×650	500		< 70	15

Note:This specification is just reference,any changes are subject to the magnetic separator products.

Magnetic Separator Working Principle
When slurry flows into trough across ore-feeding tank, loose ore particles enter then trough's ore-feeding zone under waterflow of ore-feeding hosepipe. Upon magnetic field effect, magnetic particles get together and form into " magnetic mass" or " magnetic linkage", which is absorbed to the cylinder under magnetic forece when it moves toward magnetic pole. Because the polarity of magnetic pole is alternatedly disposed along the cylinder's rotation direction and remains unchanged at work, gangue and other non-magnetic minerals among " magnetic mass" or " magnetic linkage" fall off when the cylinder rotates.Then the " magnetic mass" or " magnetic linkage" absorbed to the cylinder surface comes out as ore concentrate. Then the ore concentrate is unloaded into concentrate trough under under waterflow of ore-unloading hosepipe, when it moves to the marginal magnetic system with lowest magnetic force along the cylinder rotation. And non-magnetic or weak magnetic minerals left in the slurry is discharged out of trough, which is called gangue.

previous：flotation machine NEXT：NONE