flotation machine

TIME：2022-09-27

Flotation Machine can be used to separate nonferrous metal, ferrous metal, heavy metal, nonmetallic mine, chemical material and recycling minerals. Each chute can inhale gas, sink magma, separate. No asisting equipments are required,and it must be levelly installed. It is easy to change the flow chart. The cycling way of magma is very reasonable. It can reduce the impurities to a great extent. There is automatic equipment on the magma surface, easy to adjust. The impeller also owns the upper and lower retroversion blade. The upper one makes the magma cycle upward, while the lower one makes the magma cycle downward.

Flotation machine Performance and Features

1. Reasonable design
2. High-efficiency
3. Low consumption,energy saving
4. Easy to maintain
5. Easy to operate

Specifications of Flotation Machine

Model	Finite volume (m³)	Tough size(m)	Impeller		Power (Kw)	Blower pressure (Kpa)	Air consumption (m³/min)	Capacity (m³/min)
			Diameter (m)	Line speed (M/s)
KYF-2	2	1.30×1.30×1.25	0.42	5.3	5.5	> 16	0-3	0.5-2
XCF-2			0.47	7.5	7.5			0.5-1
KYF-3	3	1.60×1.60×1.40	0.48	5.5	5.5/7.5	≥18	0-5	0.7-3
XCF-3			0.54	7	7.5/11			0.7-1.5
KYF-4	4	1.80×1.80×1.50	0.55	5.76	11	≥19.8	0-6	1~4
XCF-4			0.62	6	15			1~2
KYF-8	8	2.20×2.20×1.95	0.63	6	15	≥21.5	0-10	2~8
KCF-8			0.72	7.5	22			2~4
KYF-16	16	2.80×2.80×2.4	0.74	6.2	22/30	≥25.5	0-15	4~16
KCF-16			0.86	7.8	37			4~8
KYF-24	24	3.10×3.10×2.90	0.8	6.84	37	30	0-17	6~24
XCF-24			0.93	7.95	55			6~12
KYF-38	38	3.60×3.60×3.40	0.9	6.9	45	34	0-25	8~38
XCF-38			1.05	8.15	75			8~19

The impellers are driven through V belt transmission, which brings centrifugal effect to form the negative pressure. On the one hand, the flotation machine inhales sufficient air to mix with ore slurry; on the other hand it stirs ore slurry and mix with medication to form the mineralized froth. To adjust the height of flashboard to control the liquid level and make the useful froth scraped by loam board. Each chute can inhale gas, sink magma, separate. No assisting equipments are required, and it must be levelly installed. It is easy to change the flow chart. The cycling way of magma is very reasonable. It can reduce the impurities to a great extent. There is automatic equipment on the magma surface, easy to adjust. The impeller also owns the upper and lower retroversion blade. The upper one makes the magma cycle upward, while the lower one makes the magma cycle downward.

previous：rotary dryer NEXT：magnetic separator