CH Single cylinder cone crusher

MS single-cylinder hydraulic cone crusher integrates mechanical, hydraulic, electrical, automation, intelligent control and other technologies. It represents the world's crusher technology. It can be widely used in metal and non-metal mines, cement, sand, metallurgy and other industries. Crushing, fine crushing and superfine crushing operations. It has the advantages of high crushing efficiency, low production cost, convenient maintenance and adjustment, and excellent particle size of crushed products.

Single cylinder cone crusher Performance and Features

MS single-cylinder hydraulic cone crusher is mainly composed of upper frame body, middle frame body (medium crush type), lower frame body, movable cone part, eccentric sleeve part, transmission part, hydraulic cylinder part and other components. When working, the motor drives the horizontal shaft to rotate, the horizontal shaft drives the eccentric sleeve to rotate through the gear, and then the eccentric sleeve drives the cone to make a circular swing, so as to achieve continuous crushing of the stones.

Technical Specifications of Single cylinder cone crusher

Model	Cavities	Maximum feeding size (mm)	Minimum discharging size (mm)	Capacities (t/h)	Maximum installed power (kW)	Overall dimension (mm)
CH420	S1(Extra Coarse)	240	22	85-170	90	1550×1575×2545
	S2(Medium Coarse)	200	19	70-130
	H1(Fine)	135	10	45-115		1550×1575×1965
	H2(Medium Fine)	65	8	35-80
	H3(Extra Fine)	35	4	27-60
CH430	S1(Extra Coarse)	360	25	120-345	160	1875×1920×3195
	S2(Medium Coarse)	300	22	105-305
	S3(Coarse)	235	19	90-275
	H1(Fine)	185	13	66-210		1875×1920×2400
	H2(Medium Fine)	90	10	65-165
	H3(Extra Fine)	50	6	48-105
CH440	S1(Extra Coarse)	450	35	255-605	250	2100×2320×4096
	S2(Medium Coarse)	400	29	215-515
	S3(Coarse)	300	25	190-490
	H1(Fine)	215	16	110-395		2100×2320×2780
	H2(Medium Fine)	110	13	115-340
	H3(Extra Fine)	70	8	90-255
CH660	S1(Extra Coarse)	560	41	335-1050	315	2380×2735×4630
	S2(Medium Coarse)	500	38	305-895
	H1(Fine)	275	16	170-665		2380×2735×3265
	H2(Medium Fine)	135	16	190-505
	H3(Extra Fine)	65	13	205-320
CH870	S1(Extra Coarse)	560	54	500-1300	450	2906×3187×4582
	S2(Medium Coarse)	465	51	450-1200
CH960	H1(Fine)	300	22	430-1515	560	3780×2341×4531
	H2(Medium Fine)	155	19	380-1375
	H3(Extra Fine)	80	10	270-775
CH750	H1(Fine)	370	25	460-2130	750	3100×3623×5305
	H2(Medium Fine)	195	22	525-1605
	H3(Extra Fine)	85	10	350-885

Note:This specification is just reference,any changes are subject to the jaw crusher products

Jaw Crusher Working Principle

The eccentric shaft rotates under the action of drive device, making the jaw move up and down. The materials are broken into small pieces as a result of the motion of collision, squeezing and rubbing. After this, materials are discharged from the discharge port.